Servicing

Annual servicing ensures less equipment downtime, which in turn means few interruptions to operations, longer asset life and improved efficiency. Autoguide offer machine services throughout the year, for most of our product range. If your machine is not listed, please contact us for further information.

UPDATE: Contact us to discuss your servicing requirements. Please make us aware of any faults or repair work required. Collection/Delivery. Usual turnaround time is 7-10 working days however this is dependent on our current bookings and parts required.  A full report will be issued on completion of the service, detailing advisories and potential future work. This will be discussed with you prior to despatch.

Powerhead / Torque Head

Service includes:

Hydraulics system pressure tested and checked for any signs of leaks
Each fittings and valve checked for signs of leaks, fatigue and wear
Hoses/couplers examined for cuts, abrasions and wear
Gauge examined for leaks, cracks and wear
Visual check with body/casing removed
Motors removed to check for signs of shaft seal failure
Output shafts and seals inspected for wear and leaks
Body and top plate welds and fixings checked for signs of fatigue and weld failure
Pins and bosses examined for signs of wear
Grease points inspected and replaced if u/s
Gear oil drained. Checked with a magnet for signs of gear wear and swarf and replaced to correct level
Swivels and excavator mounting brackets checked for distortion, cracked welds and pin wear
All pins and bosses lubricated after a full clean and wear check

*Option to repaint and supply new decal kit (Subject to additional costs)
*Advisories/Recommendations are highlighted during the service (Additional costs may apply)

 

Hand-held Torque Head

Service includes:

Visual check
Each fitting tested and checked for signs of leaks, fatigue and wear
Hoses examined for cuts, abrasions and wear
Gauge examined for leaks, cracks and wear
Grease chain and re-tension
Replace drive adaptor (60R/76R)
Check handles for wear and cracked welds
Check all functions

*Option to repaint and supply new decal kit <em>(Subject to additional costs)
*Advisories/Recommendations are highlighted during the service <em>(Additional costs may apply)

 

Hydraulic Powerpack

Service includes:

Visual check
Replace engine oil
Check/Replace spark plugs
Replace fuel filter
Replace air filter


 

Postmaster

Service includes:

Pressure wash
Visual weld check
Run up/Test
Check jaw functions
Hoses to be examined for cuts, abrasions and wear
Hose terminations/quick couplers to be tested
Each fitting to be checked for signs of leaks, fatigue and wear
Check buffers for abrasions and wear
Change gearbox oil

*Option to repaint and supply new decal kit (Subject to additional costs)
*Advisories/Recommendations are highlighted during the service (Additional costs may apply)

 

Front Loader Pole Grab

Service includes:

Steam clean
Visual weld check
Check all functions
Hoses to be examined for cuts, abrasions and wear
Remove and lubricate all pins
Replace grease nipples
Grease slew ring
Test all electrics/ wiring

Autoguide Utility Pole Grab

*Option to repaint and supply new decal kit (Subject to additional costs)
*Advisories/Recommendations are highlighted during the service (Additional costs may apply)

 

Auto-Roller Service

Please visit www.cricketroller.co.uk to book your annual roller service. Full details available on request.