Crane Mounted Auger Drives

50,000 PXV Variable Speed Crane Mounted Powerhead

The Autoguide 50,000 PXV is used throughout the utility industry for installing large LV and HV poles. As standard, the unit is supplied with an 18” Rock Ripper auger offering great performance in all conditions. With the addition of an anchor driver the auger can be easily changed to install screwed stays or PISA anchors

The hydraulic fold up bracket offers a fast and safe system for storing the auger unit along the crane boom or in the bed of the lorry.

The addition of the Quick Hitch allows full utilisation of the crane capacity, if required, by simply removing the whole auger drive and powerhead from the boom in seconds. Attaching the unit is also very quick allowing the whole vehicle to be utilised as a multi tool.

 

HYDRAULIC FOLD UP

The Hydraulic Fold-Up Brackets have been designed to allow the Powerhead to be stowed for transport and to allow the crane to be used for pole work without removing attachments.

The Hydraulic Fold-Up bracket uses the Quick Hitch system for ease of attachment / detachment from the crane. This will allow the crane to be used to its full capacity.

Autoguide can custom design the interface plates between the fold-up brackets and the crane boom to suit a large variety of lorry loaders

 

ROPE WIND UP

The rope wind up system is offered with the 50PXV when the vehicle is used for poling only. The permanently mounted frame holds the latch, rope and safety stop. The auger shaft or extension is used to wind the auger into its stowed position.

 

50,000PXV with Heavy Duty Auger

Specifications

Total Weight 450kg
Torque 12,500 Nm
Speed 60 RPM
Flow 30-50 l/min
Pressure 275 BAR
Maximum Auger 18"
Excavator Size 11 t/m - 27 t/m cranes
50,000PXV with Hydraulic Folding Bracket and Quick Hitch

40,000 PXV Variable Speed Crane Mounted Powerhead

 

 

The Autoguide 40,000 PXV is widely used throughout the telecom and utility industry for installing telecom and LV poles. As standard, the unit is supplied with a 12” Rock Ripper auger offering great performance in all conditions.

This unit has been proven over many years of hard use within the telecom industry. It offers both high torque for tough conditions as well as a fast free spin quickly removing the spoil or sticky clay without the user ‘scraping ‘ the auger clean. This light weight unit can be fitted to lorry loaders from 7T/M and the auger flight can be removed should more lifting capacity be required. The system is normally permanently mounted to ensure the variable speed motor is free from the opportunity of contamination. There is also a relief valve to protect the motor. With the addition of a stay drive tube the unit can also install PISA anchors or screwed stays.

 

ROPE WIND UP

The rope wind up system is offered as standard with the 40PXV.This simple system allows the Powerhead and Auger to be stowed along the crane boom keeping the lifting hook free for use. The permanently mounted frame holds the latch, rope and safety stop. The auger shaft or extension is used to wind the auger into its stowed position.

For Pole Erection Units (PEU) the crane and Powerhead are usually stowed along the body and often on the head board. The body of the powerhead and a specially designed bracket can be used to lock the crane in the position to comply with current regulations for crane stowage.

 

40,000PXV Rope Windup Auger Drive on Autoguide TC600 and Palfinger Crane

Specifications

Total Weight 300kg
Torque 10,000 Nm
Speed 60 RPM
Flow 25-50 l/min
Pressure 275 BAR
Maximum Auger 15"
Excavator Size 7 t/m - 12 t/m cranes

Rock Master

Autoguide can also offer a more specialist machine. The Rock Master combines the best of both variable speed powerhead plus the addition of a vibrating gearbox.

The Rock Master is a fast, efficient auger with the ability to drill through fractured rock in some of the most demanding situations. With the vibrator activated, the whole auger string is active allowing the hardened rock picks to break our rock leaving a clear hole for Utility poles. Typically the Rock Master can drill 1m deep 12” diameter in granite in one hour.

The unique feature of this machine is with vibration off, the same unit can be used for standard soil hols without adaption. This gives the users a versatile all round powerhead that can be used every day. With a small adaption the unit can also install PISA anchors.

Specifications

Total Weight 525kg
Torque 1,150 Nm
Speed 50 RPM
Flow 50 l/min
Pressure 275 BAR
Maximum Auger 18"
Crane Size 10-15 t/m
Rock Master Vibrating Auger Drive on BT truck

Downloads

103icon

Utilities - Solutions & Accessories Brochure

104icon

Utilities Technical Specifications

036icon

Rock Master Leaflet

077icon

Auger Powerheads Leaflet