Plantworx 2019

Autoguide Equipment and ABC Anchors are delighted to be exhibiting again at Plantworx this year from 11-13th June.

When we last exhibited in 2017, visitors were especially interested in our range of vibrating post installers. We previously demoed our Midi Postmaster, but this year we will also be demoing our Maxi Postmaster, which can install posts up to 10" diameter.

Read More

Plantworx 2017

Autoguide Equipment and ABC Anchors would like to thank all of those who joined us at the Plantworx Construction Equipment Show last week! We had some mixed weather conditions, but were delighted to see a high level of interest over all three days despite the sea of mud!

Visitors were especially interested in our range of vibrating post installers. Throughout the show, we were demoing our Midi Postmaster installing and removing 6” posts, although the machine is capable of driving up to 8” posts on a 3-5 tonne excavator.

Also displayed at the show was a variety of utilities equipment including our Utility Pole Grab, Cable Drum Spreader Bar and 40,000 PX Powerhead, as well as ABC Anchor’s range of screwpiles.

We hope everyone enjoyed themselves and we look forward to exhibiting at Plantworx again next time.

Midi-Postmaster Demonstration

Utility Pole Grab

Front Loader and Excavator Utility Pole Grab

The Autoguide front loader grab has been designed with the utility contractor in mind, incorporating a large diameter pivot bearing, dual rams and an electric control for the changeover of functions.

A simple mounting system offers the same unit can fit to front loaders, tele-handlers and slew machines from 8 tonne to 16 tonne. The grab has been developed to offer the user flexibility for 10 degs below horizontal rotation up to 10 degrees past vertical. This ensures the pole can be positioned accurately on uneven ground. The unique twin rotate rams and large pivot reduces play when delicate positioning is required for example live line.

We offer two sizes of grab, SWL of 600kg and 1300kg for both telecoms, LV and HV fully dressed poles.

The grab has been designed for pole removal as well as installation The high strength jaws ensure a positive grip on the pole for safe removal without compromise .

 

Autoguide Utility Pole Grab on JCB 4CX Excavator

Specifications

Total Weight 650kg and 1000kg
SWL 600kg and 1300kg
Pressure 215 BAR
Pole Size 6-24"
Autoguide Utility Pole Grab on JCB 4CX Excavator

Crane Mounted Utility Pole Grab

The crane mounted pole grab has been specially designed to allow the operator to utilise a hands free system for loading and unloading poles from the pole dump on to a carrier vehicle
Our two models offer a safe working system for pole loading and pole stack work along with a manipulation on the more complex unit. Along with the Autoguide quick hitch the grab can be changed over from pole handling to pole augering safely and quickly.

 

2 Function Pole grab

The Autoguide 2 function pole grab offers a safe hands free operation for loading and unloading timber and composite poles. The grab system uses an accumulated circuit to ensure a constant pressure is applied to the poles, this can be set for more delicate poles to prevent damage.

The second function is rotation, this allows the user to rotate the pole for alignment along side the job or in line with the pole rack on the carrying vehicle.

These functions can be controlled either by 2 double acting circuits or if the autoguide quick hitch and auger unit is fitted by use of one double acting circuit and an electrical change over between rotate and grab.

Palfinger Crane Mounted Pole Grab
Palfinger Crane Mounted Pole Grab

Specifications

  2 Function
Weight 150kg
SWL 1,000kg
Working Pressure 215 BAR
Hydraulic functions

2 x double acting services

or 1x double acting services with changeover valve

Crane Mounted Utility Pole Grab

Downloads

103icon

Utilities - Solutions & Accessories Brochure

104icon

Utilities Technical Specifications