2015 has already proven to be an extremely busy year for Autoguide Equipment. With the new revamped website our current and potential customers will be able to easily search through our extensive range of products/services.
As Autoguide is an ever developing company the new websites offer a distinction between its sister companies, Auto-Roller and ABC Anchors.
The TC600 is a track mounted carrier for loader cranes and work platforms, aimed at utility companies.
The 7.5 tonne tracked TC600 Terrain Master has rubber tracks and has been specifically designed to carry either a nine metre/tonne loader crane or a 15 metre aerial work platform.
It has a top speed of 11kph and is available with full radio remote control and side, front and rear stabilisers. The unit also features a 4,500kg capacity electric winch and a charging station for the remote control batteries.
Complete Radio Control Operation
High visibility ROPS and FOPS tested cab
Optional radial hydraulic legs provide complete working stability
Rubber tracks and a proven track suspension system
Compact Dimensions
Vehicle Type |
Autoguide 7.5 tonne gross hydrostatic drive, rubber tracked carrier |
Cab |
Glazed and heated cab conforming to ROPS ISO 3471/ FOPS ISO3449
|
Engine |
3.33 litre Kubota V3307-DI-E3B diesel engine. 55.4 kw |
Drive |
Hydrostatic |
Brakes |
Electro – Hydraulic negative type (automatically fail safe) |
Exhaust |
Mounted on cab
|
Electrics |
24 volt - 140 ah with 45amp alternator, battery isolator switch |
Track Width | 500 mm |
Track Gauge | 1450 mm |
Sprocket Centres | 2440 mm |
Ground Clearance | 350 mm |
Overall Length | 3800 mm |
Overall Width | 2050 mm |
Overall Height | 250 mm (over exhaust) |
GVW | 7,500 kgs |
Gradeability | 30 degrees |
Speed (low ratio) | 0-6 km/hr |
Speed (high ratio) | 0-11 km/hr |
Ground Pressure | 0.15kg/cm2 (empty) |
Security | Engine immobiliser |
Livery | To customer standard |
Shown here with a Palfinger 9001-EH triple telescopic crane and Autoguide 40,000PXV auger unit, the compact dimensions are easy to see.
In conjunction with the fully powered crane stabilisers, the three radial legs interface with the crane stability system, allowing the full 9 tonne metres capacity to be utilised.
For crane operation a Parker load sensing 60 l/m 320 BAR pump is fitted which together with an auto throttle system, saves fuel whilst extending engine life.
Fitted with a Parker IQAN system the TC600 and crane are fully radio controlled.
Crane | 9001-EH triple telescopic |
Capacity | 9 tonne |
The Terrain Master TC600 Pole Erection Unit consists of Palfinger Crane, Autoguide 40,000 PXV Powerhead on a Rope Wind-Up bracket with a choice of Augers. Also available is the crane mounted pole grab.
The Autoguide 50,000 PXV is used throughout the utility industry for installing large LV and HV poles. As standard, the unit is supplied with an 18” Rock Ripper auger offering great performance in all conditions. With the addition of an anchor driver the auger can be easily changed to install screwed stays or PISA anchors
The hydraulic fold up bracket offers a fast and safe system for storing the auger unit along the crane boom or in the bed of the lorry.
The addition of the Quick Hitch allows full utilisation of the crane capacity, if required, by simply removing the whole auger drive and powerhead from the boom in seconds. Attaching the unit is also very quick allowing the whole vehicle to be utilised as a multi tool.
The Hydraulic Fold-Up Brackets have been designed to allow the Powerhead to be stowed for transport and to allow the crane to be used for pole work without removing attachments.
The Hydraulic Fold-Up bracket uses the Quick Hitch system for ease of attachment / detachment from the crane. This will allow the crane to be used to its full capacity.
Autoguide can custom design the interface plates between the fold-up brackets and the crane boom to suit a large variety of lorry loaders
The rope wind up system is offered with the 50PXV when the vehicle is used for poling only. The permanently mounted frame holds the latch, rope and safety stop. The auger shaft or extension is used to wind the auger into its stowed position.
Total Weight | 450kg |
Torque | 12,500 Nm |
Speed | 60 RPM |
Flow | 30-50 l/min |
Pressure | 275 BAR |
Maximum Auger | 18" |
Excavator Size | 11 t/m - 27 t/m cranes |
The Autoguide 40,000 PXV is widely used throughout the telecom and utility industry for installing telecom and LV poles. As standard, the unit is supplied with a 12” Rock Ripper auger offering great performance in all conditions.
This unit has been proven over many years of hard use within the telecom industry. It offers both high torque for tough conditions as well as a fast free spin quickly removing the spoil or sticky clay without the user ‘scraping ‘ the auger clean. This light weight unit can be fitted to lorry loaders from 7T/M and the auger flight can be removed should more lifting capacity be required. The system is normally permanently mounted to ensure the variable speed motor is free from the opportunity of contamination. There is also a relief valve to protect the motor. With the addition of a stay drive tube the unit can also install PISA anchors or screwed stays.
The rope wind up system is offered as standard with the 40PXV.This simple system allows the Powerhead and Auger to be stowed along the crane boom keeping the lifting hook free for use. The permanently mounted frame holds the latch, rope and safety stop. The auger shaft or extension is used to wind the auger into its stowed position.
For Pole Erection Units (PEU) the crane and Powerhead are usually stowed along the body and often on the head board. The body of the powerhead and a specially designed bracket can be used to lock the crane in the position to comply with current regulations for crane stowage.
Total Weight | 300kg |
Torque | 10,000 Nm |
Speed | 60 RPM |
Flow | 25-50 l/min |
Pressure | 275 BAR |
Maximum Auger | 15" |
Excavator Size | 7 t/m - 12 t/m cranes |
Autoguide can also offer a more specialist machine. The Rock Master combines the best of both variable speed powerhead plus the addition of a vibrating gearbox.
The Rock Master is a fast, efficient auger with the ability to drill through fractured rock in some of the most demanding situations. With the vibrator activated, the whole auger string is active allowing the hardened rock picks to break our rock leaving a clear hole for Utility poles. Typically the Rock Master can drill 1m deep 12” diameter in granite in one hour.
The unique feature of this machine is with vibration off, the same unit can be used for standard soil hols without adaption. This gives the users a versatile all round powerhead that can be used every day. With a small adaption the unit can also install PISA anchors.
Total Weight | 525kg |
Torque | 1,150 Nm |
Speed | 50 RPM |
Flow | 50 l/min |
Pressure | 275 BAR |
Maximum Auger | 18" |
Crane Size | 10-15 t/m |
The Autoguide Utility spec excavator powerhead package 40PX has been widely recognised in the telecom and Electricity industry for many years. The unit allows the plant operator to utilise both the speed of augering for pole planting along with the ability to also install the screwed stays
This robust fixed speed unit fits all makes and models of excavator and backhoe from 5– 8T and increase pole planning efficiency over the standard buckets
This bespoke bracket allows the powerhead assembly to fold away for safe secure transport while also carrying the auger bit and stay tube driver. The unit can be easily detached by use of the quick hitch or removal of pins and changed for a bucket for other tasks
With the unit stowed it allows for easy loading of the PISA anchor system and maintenance checks
Total Weight | 345kg |
Torque | 8,500 Nm |
Speed | 22 RPM |
Flow | 60 l/min |
Pressure | 275 BAR |
Maximum Auger | 20" |
Excavator Size | 6-8t Slew machine or Backhoe loader |
Autoguide can also offer a more specialist machine. The Rock Master combines the best of both variable speed powerhead plus the addition of a vibrating gearbox.
The Rock Master is a fast, efficient auger with the ability to drill through fractured rock in some of the most demanding situations. With the vibrator activated, the whole auger string is active allowing the hardened rock picks to break our rock leaving a clear hole for Utility poles. Typically the Rock Master can drill 1m deep 12” diameter in granite in one hour.
The unique feature of this machine is with vibration off, the same unit can be used for standard soil hols without adaption. This gives the users a versatile all round powerhead that can be used every day. With a small adaption the unit can also install PISA anchors.
Total Weight | 525kg |
Torque | 1,150 Nm |
Speed | 50 RPM |
Flow | 50 l/min |
Pressure | 275 BAR |
Maximum Auger | 18" |
Excavator Size | 10-15 t/m crane 8T slew or Backhow |
What machine do you have? – Check COMPATIBILITY
Hydraulic Flow? Hydraulic Pressure? Does it have an Auxiliary Hydraulic Circuit?
What size hole do you need to drill? – Check HOLE SIZE
What ground conditions will you be drilling? – Check GROUND CONDITIONS
If you are unsure which product is most suitable, or simply want to discuss your requirements – Please don’t hesitate to contact us!
Autoguide offer a complete range of augers for a wide range of applications and soil conditions. All of our standard augers come in 1.2m lengths, with an optional 1m extension.
Designed for drilling solid rock.
Designed for drilling in dense gravel and soil.
Class
|
Common Soil Type
|
Geological Soil Classification
|
Probe Values
in/labs (Nm) |
Typical Blow Count
in/labs (Nm) |
|||
![]() |
Sound, hard rock - Unweathered | Granite, Basalt, Massive Limestone | N/A | N/A | |||
Very dense and/or cemented sands, Coarse gravel & Cobbles | Caliche (Nitrate-bearing Gravel/Rock) |
750-1600 (85-181) |
60-100+
|
||||
Dense, Fine Sands, very hard silts & clays (may be pre-loaded) | Basalt Till, Boulder Clay, Caliche, Weathered Laminated Rock | 750-1600 (85-181) |
45-60 | ||||
Dense sands & gravel, hard silts & clays | Glacial Till, Weathered Shales, Schist, Gneiss & Sandstone | 600-750 (68-85) |
35-50 | ||||
Medium dense sand & gravel; very stiff to hard silts and clays | Glacial Till, Hardpan, Marls |
500-600 (58-68) |
24-40
|
||||
Medium dense coarse sands & sandy gravels; stiff to very stiff clays
|
Saprolites, Residual Soils |
400-500 (45-56) |
14-25
|
||||
Loose to medium dense fine to coarse sands to stiff clays and silt | Dense Hydraulic Fill, Compacted Fill, Residual Soils |
300-400 (34-45) |
7-14
|
||||
Loose, fine sands; alluvum; loess
medium & varied clays, fill |
Flood Plain Soils. Lake Clays, Abode, Fill |
100-200 (11-25) |
4-8
|
||||
Peat, organic silts, inundated silts, fly ash, very loose sands, very soft | Miscellaneous Fill, Swamp Marsh |
Less than 100
|
0-5
|
||||
ATTACHMENT SIZE
|
|||||||
LIGHT DUTY
|
HEAVY DUTY
|
ROCK RIPPER
|
HEAVY DUTY
|
ROCK RIPPER
|
|||
04337
|
10788 | 10634 | |||||
05233
|
02643
|
04488
|
10713 | ||||
05206
|
01508
|
27522
|
08083
|
01469
|
|||
08473
|
02644
|
01562
|
01424
|
06409
|
|||
06410
|
01122
|
29267 |
03845
|
05168
|
|||
08474
|
10930
|
02645
|
|||||
08475
|
03096
|
|
|||||
08476
|
|
10693 | |||||
PART #
|
Other sizes are available, please contact our team for more details or to request further literature.
AUGER PIN
part # 30154
AUGER PIN
part # 23368
6 BOLT to 65mm HEX
part # 22347
6 BOLT to 2" HEX
part # 25973
8 Bolt to 65mm HEX
part # 30992
2m HOSE KIT
part # 31109
2" HEX EXTENSION
part # 32014
65mm HEX EXTENSION
part # 22347
2 days ago
4 days ago
7 days ago
1 week ago
2 weeks ago