TC600 - Terrain Master
Introduction
Autoguide has launched a new track mounted carrier for loader cranes and work platforms, aimed at utility companies.
The 7.5 tonne tracked TC600 Terrain Master has rubber tracks and has been specifically designed to carry either a nine metre/tonne loader crane or a 15 metre aerial work platform.
It has a top speed of 11kph and is available with full radio remote control and side, front and rear stabilisers. The unit also features a 4,500kg capacity electric winch and a charging station for the remote control batteries.
Chassis
Features
Complete Radio Control Operation
High visibility ROPS and FOPS tested cab
Optional radial hydraulic legs provide complete working stability
Rubber tracks and a proven track suspension system
Compact Dimensions
Specifications
| Vehicle Type |
Autoguide 7.5 tonne gross hydrostatic drive, rubber tracked carrier |
| Cab |
Glazed and heated cab conforming to ROPS ISO 3471/ FOPS ISO3449
|
| Engine |
3.33 litre Kubota V3307-DI-E3B diesel engine. 55.4 kw |
| Drive |
Hydrostatic |
| Brakes |
Electro – Hydraulic negative type (automatically fail safe) |
| Exhaust |
Mounted on cab
|
| Electrics |
24 volt - 140 ah with 45amp alternator, battery isolator switch |
| Track Width | 500 mm |
| Track Gauge | 1450 mm |
| Sprocket Centres | 2440 mm |
| Ground Clearance | 350 mm |
| Overall Length | 3800 mm |
| Overall Width | 2050 mm |
| Overall Height | 250 mm (over exhaust) |
| GVW | 7,500 kgs |
| Gradeability | 30 degrees |
| Speed (low ratio) | 0-6 km/hr |
| Speed (high ratio) | 0-11 km/hr |
| Ground Pressure | 0.15kg/cm2 (empty) |
| Security | Engine immobiliser |
| Livery | To customer standard |
Loader Crane
Shown here with a Palfinger 9001-EH triple telescopic crane and Autoguide 40,000PXV auger unit, the compact dimensions are easy to see.
In conjunction with the fully powered crane stabilisers, the three radial legs interface with the crane stability system, allowing the full 9 tonne metres capacity to be utilised.
For crane operation a Parker load sensing 60 l/m 320 BAR pump is fitted which together with an auto throttle system, saves fuel whilst extending engine life.
Fitted with a Parker IQAN system the TC600 and crane are fully radio controlled.
Specifications
| Crane | 9001-EH triple telescopic |
| Capacity | 9 tonne |
Pole Erection Unit
The Terrain Master TC600 Pole Erection Unit consists of Palfinger Crane, Autoguide 40,000 PXV Powerhead on a Rope Wind-Up bracket with a choice of Augers. Also available is the crane mounted pole grab.
Terrain Master TC600 Brochure
Terrain Master TC600 Chassis Brochure
